EZSync FTDI Chip Usb to RS232 Serial Adapter Cable with TX/RX LED, 9 Pin DB9 Male Connector, EZSync011

  • 1.5m(60 inches) industrial grade USB to RS232 (DB9 Male) adapter cable. Integrated TXD/RXD LEDs to provide a visual indication of data traffic through the adapter.
  • RS-232 data signals: TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND. Standard Windows baud rates (300bps to 921.6Kbps)
  • Shielded and transparent cable with in-line ferrite bead. Extra strength, low EMI and tangle free.
  • Works with USB 1.1 & 2.0 Host and Hub ports. Powered directly by USB port, no external power adapter required.
  • Industry most reliable FTDI chip set & device drivers for maximum compatibility. Works with all Windows and Mac OS versions.

Buy from Amazon

SKU: EZSync011 Category:

Description

Overview:

Every EZSync cable is built to last for years with high-quality industrial grade materials. EZsync011 is a USB to RS-232 interface adapter cable. No external power supply needed. Compatible with USB and RS-232 standards. EZsync011is capable of performing the conversion from single-ended USB signal into UART signal of RS-232. DB9 male connectors are used for connection from RS-232 interface. The unique I/O circuit of the internal zero delay auto transceiver contained in the converter controls the data stream direction automatically. The converter is plug-and-play. Power indicator light and data traffic indicator light are also available with the converter for malfunction indication.

Product specification:

1. Standards: Conforming to USB Ver1.0, 1.1 and 2.0 and EIA RS-232.

2. USB signals: VCC, DATA+, DATA-, GND and FG.

3. RS-232 signals: DCD RXD TXD DTR GND DSR RTS CTS RI.

4. Working mode: asynchronous point-to-point.

5. Direction control: adoption of automatic data stream control for automatic recognition and control of data transmission direction.

6. Baud rate: 300 to 921.6Kbps, automatic detection of the transmission rate of the serial interface signal.

7. Interface protection: +-15KV electrostatic protection.

8. Interface : USB male(Plug) connector and DB9 male connector.

9. Transmission media: twisted-pair cable or shielded cable.Diver software: Plug-and-play after Windows7, or please download the latest driver from FTDI website: http://www.ftdichip.com/Drivers/VCP.htm

10. Diver software: Plug-and-play after Windows7, or please download the latest driver from FTDI website: http://www.ftdichip.com/Drivers/VCP.htm

Download

# File Description File size
1 pdf EZsync011 datasheet 514 KB
2 gz FTDI driver-Linux FTDI driver-Linux
130 KB
3 zip FTDI Driver-Windows Driver
2 MB
4 pdf FTDI_Drivers_Installation_Guide_for_MAC_OSX 1 MB

Reviews

There are no reviews yet.

Be the first to review “EZSync FTDI Chip Usb to RS232 Serial Adapter Cable with TX/RX LED, 9 Pin DB9 Male Connector, EZSync011”

Your email address will not be published. Required fields are marked *