EZSync USB Programming Cable for Mitsubishi Melsec FX PLCs, FX-USB-AW Compatible, EZSync505

  • EZSync USB programming cable for Allen Bradley Micrologix PLC. This cable is used for transferring the program between PC to the PLC and vice versa.
  • This cable has USB on one end and the mini DIN programming interface on the other end. Gold plated interface connectors are highly resistant to corrosion or oxidation which provide long lifetime of reliable connection
  • Support Windows XP, Windows 2000, Window 7, 8 and 10. Compatible with all Mitsubishi FX Series PLCs including FX1S, FX1N, FX2N, FX2NC, FX3G, FX3U
  • Support Melsoft GX Developer programming software (not included) through RS422 protocol (8 pin mini DIN port)
  • The cable length is 3 meter (~10 feet)
Category:

Description

EZSync505 is a USB PLC programming cable for Mitsubishi FX PLCs including FX1S, FX1N, FX2N, FX2NC, FX3G, FX3U. It connects a USB interface with PC/Mac through an RS422 serial interface to the PLC mini DIN port. It allows the user to program, monitor and communicate with PLC through the USB port.The cable is self-powered from USB port on the PC side and PLC provides power on the PLC side, no external power is needed.

Tip:

  • Download and driver installation instructions at HERE
  • If the driver is installed correctly, the cable should appear in device manager under “ports(COM&LPT)”  as showing in below

CH340 in the Device Manager

Driver installation failure? Depending on your system settings, you may need to disable driver signature enforcement on Windows. Here is an “instruction” showing you how to do it.

Reviews

There are no reviews yet.

Be the first to review “EZSync USB Programming Cable for Mitsubishi Melsec FX PLCs, FX-USB-AW Compatible, EZSync505”

Your email address will not be published. Required fields are marked *

Related products