EZSync Usb to RS232 Serial Adapter Cable with TX/RX LED, 9 Pin DB9 Male Connector, EZSync011

  • 1.5m(60 inches) industrial grade USB to RS232 (DB9 Male) adapter cable. Integrated TXD/RXD LEDs to provide a visual indication of data traffic through the adapter.
  • RS-232 data signals: TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND. Standard Windows baud rates (300bps to 921.6Kbps)
  • Shielded and transparent cable with in-line ferrite bead. Extra strength, low EMI and tangle free.
  • Works with USB 1.1 & 2.0 Host and Hub ports. Powered directly by USB port, no external power adapter required.
  • Industry most reliable Serial chip set & device drivers for maximum compatibility. Works with all Windows and Mac OS versions.
SKU: EZSync011 Category:

Description

Overview:

Every EZSync cable is built to last for years with high-quality industrial grade materials. EZsync011 is a USB to?RS-232 interface adapter cable. No external power supply?needed. Compatible with USB and RS-232 standards.?EZsync011is capable of performing the conversion from single-ended USB signal into UART signal of RS-232.?DB9 male connectors are used for connection from RS-232 interface.?The unique I/O circuit of the internal zero delay auto transceiver contained in the?converter controls the data stream direction automatically. The converter is?plug-and-play.?Power indicator light and data traffic?indicator light are also available with the converter for malfunction indication.

Product specification:

1. Standards: Conforming to USB Ver1.0, 1.1 and 2.0 and EIA RS-232.

2. USB signals: VCC, DATA+, DATA-, GND and FG.

3. RS-232 signals: DCD RXD TXD DTR GND DSR RTS CTS RI.

4. Working mode: asynchronous point-to-point.

5. Direction control: adoption of automatic data stream control for automatic?recognition and control of data transmission direction.

6. Baud rate: 300 to 921.6Kbps, automatic detection of the transmission rate of the serial?interface signal.

7. Interface protection: +-15KV electrostatic protection.

8. Interface : USB male(Plug) connector and DB9 male connector.

9. Transmission media: twisted-pair cable or shielded cable.Diver software: Plug-and-play after Windows7, or please download the latest?driver from Serial website:?http://www.Serialchip.com/Drivers/VCP.htm

10. Diver software: Plug-and-play after Windows7, or please download the latest?driver from Serial website:?http://www.Serialchip.com/Drivers/VCP.htm

Additional information

Disclaimer

This product is owned by Purenitetech under the EZSync brand. It might be compatible but is not designed or created by FTDI, Onetouch, Freestyle, Bayer, or any other brand names.
Brand

EZSync

Reviews

There are no reviews yet.

Be the first to review “EZSync Usb to RS232 Serial Adapter Cable with TX/RX LED, 9 Pin DB9 Male Connector, EZSync011”

Your email address will not be published. Required fields are marked *

Related products