EZSync USB to RS485/RS422 Serial Adapter Cable with RX/TX LEDs, 9 Pin DB9 connector with Terminal Extension Board ,Windows 10 Supported, EZSync201

5 feet (1.6 meter) industrial grade USB to RS485/422 (DB9 Male) adapter cable. Integrated TXD/RXD LEDs to provide a visual indication of data traffic through the adapter.
RS-485 signals T/R+, T/R-, GND. RS-422 signals T/R+, T/R-, RXD+, RXD-, GND
Shielded and transparent cable with in-line ferrite bead. Extra strength, low EMI and tangle free.
Powered directly by USB port, no external power adapter required. Power consumption: Static consumption less than 80mA, dynamic average consumption less than 150mA
Industry most reliable Serial chip set & device drivers for maximum compatibility. No driver installation, plug-and-Play, works with all Windows, Mac and Linux OS versions.

SKU: EZSync201 Category: USB to RS485

Description

Overview:

Every EZSync cable is built to last for years with high-quality industrial grade materials. EZsync201 is a USB to?RS-485/422 interface adapter cable. No external power supply?needed. Compatible with USB 1.1/2.0 and EIA RS-485/422 ?standards.?EZsync201 is capable of performing the conversion from single-ended USB signal into UART signal of RS-485/422.?DB9 male connectors are used for connection from RS-485/422 interface.?The unique I/O circuit of the internal zero delay auto transceiver contained in the?converter controls the data stream direction automatically. Power indicator light and data traffic?indicator light are also available with the converter for malfunction indication.

Product specification:

Standard? USB 1.1/2.0, EIA RS-485, RS-422 standard
USB signals:? VCC, DATA+, DATA-, GND, FG
RS-485 signals ?T/R+, T/R-, GND
RS-422 signals ?T/R+, T/R-, RXD+, RXD-, GND
Working format:? Asynchronous, point to point, point to multi-point, half duplex
Flow control:? Automatic Send Data Control ? no drivers needed
Baud rate:? 300-921.600bps, automatic test signal rate, auto detection of data speed
ESD Protection:? 600W surge protection, 15KV static electricity protection
Serial connector: RS-485 / RS422 side DB-9 male or terminal block
USB connector:? Type A Male
Power consumption: Static consumption less than 80mA, dynamic average consumption less than 150mA
Dimensions:? 70mm x 35mm x 18mm
Compatibility:?Supports all Windows and Mac OS versions
Driver software: Plug-and-play for Windows8 and 10, or download the latest?driver from Serial website:?http://www.Serialchip.com/Drivers/VCP.htm

Additional information

Disclaimer	This product is owned by Purenitetech under the EZSync brand. It might be compatible but is not designed or created by FTDI, Onetouch, Freestyle, Bayer, or any other brand names.
Brand	EZSync

Reviews

There are no reviews yet.

Be the first to review “EZSync USB to RS485/RS422 Serial Adapter Cable with RX/TX LEDs, 9 Pin DB9 connector with Terminal Extension Board ,Windows 10 Supported, EZSync201”