EZSync FTDI Chip USB to RS485/RS422 Serial Adapter Cable with RX/TX LEDs, 9 Pin DB9 connector with Terminal Extension Board ,Windows 10 Supported, EZSync201

  • 5 feet (1.6 meter) industrial grade USB to RS485/422 (DB9 Male) adapter cable. Integrated TXD/RXD LEDs to provide a visual indication of data traffic through the adapter.
  • RS-485 signals T/R+, T/R-, GND. RS-422 signals T/R+, T/R-, RXD+, RXD-, GND
  • Shielded and transparent cable with in-line ferrite bead. Extra strength, low EMI and tangle free.
  • Powered directly by USB port, no external power adapter required. Power consumption: Static consumption less than 80mA, dynamic average consumption less than 150mA
  • Industry most reliable FTDI chip set & device drivers for maximum compatibility. No driver installation, plug-and-Play, works with all Windows, Mac and Linux OS versions.
SKU: EZSync201 Category:

Description

Overview:

Every EZSync cable is built to last for years with high-quality industrial grade materials. EZsync201 is a USB to RS-485/422 interface adapter cable. No external power supply needed. Compatible with USB 1.1/2.0 and EIA RS-485/422  standards. EZsync201 is capable of performing the conversion from single-ended USB signal into UART signal of RS-485/422. DB9 male connectors are used for connection from RS-485/422 interface. The unique I/O circuit of the internal zero delay auto transceiver contained in the converter controls the data stream direction automatically. Power indicator light and data traffic indicator light are also available with the converter for malfunction indication.

Product specification:

  • Standard  USB 1.1/2.0, EIA RS-485, RS-422 standard
  • USB signals:  VCC, DATA+, DATA-, GND, FG
  • RS-485 signals  T/R+, T/R-, GND
  • RS-422 signals  T/R+, T/R-, RXD+, RXD-, GND
  • Working format:  Asynchronous, point to point, point to multi-point, half duplex
  • Flow control:  Automatic Send Data Control – no drivers needed
  • Baud rate:  300-921.600bps, automatic test signal rate, auto detection of data speed
  • ESD Protection:  600W surge protection, 15KV static electricity protection
  • Serial connector: RS-485 / RS422 side DB-9 male or terminal block
  • USB connector:  Type A Male
  • Power consumption: Static consumption less than 80mA, dynamic average consumption less than 150mA
  • Dimensions:  70mm x 35mm x 18mm
  • Compatibility: Supports all Windows and Mac OS versions
  • Driver software: Plug-and-play for Windows8 and 10, or download the latest driver from FTDI website: http://www.ftdichip.com/Drivers/VCP.htm

Reviews

There are no reviews yet.

Be the first to review “EZSync FTDI Chip USB to RS485/RS422 Serial Adapter Cable with RX/TX LEDs, 9 Pin DB9 connector with Terminal Extension Board ,Windows 10 Supported, EZSync201”

Your email address will not be published. Required fields are marked *